KRD41 Small Drop Test System

Product description

KRD41 series small drop tester is suitable for free-fall testing of small consumer electronics and components, such as mobile phones, walkie-talkies, electronic dictionaries, CD/MD/MP3 players, and similar devices. By performing standardized tests (including face drop, corner drop, edge drop, etc.) on electronic products and collecting corresponding data, it simulates the vertical drop impacts that may occur during transportation and handling. This provides a basis for designing product cushioning and vibration damping solutions, as well as selecting appropriate structural materials.

Download Document Get a quote

The KRD41 Series Small Drop Tester is primarily used for packaged goods that may be subjected to vertical drops during transportation and handling. Through standardized tests (face drop, edge drop, corner drop, etc.), data is collected to provide a design basis for cushioning and vibration reduction design, as well as for packaging material selection. The system complies with ISO2248-1985, IEC68-2-32, ISTA Test Procedures 1A, 1B, 1C, 1D, 1G, 2A, 2B, 2C, 3A, 3B, 3E, 3F, 3H, 3K, 6-AMAZON. Products can be tested either with or without packaging to evaluate impact resistance or drop damage during transportation. This is an indispensable testing method for improving product quality, applicable to electronic product research and development, quality control, manufacturing, and other stages.

 

  • Upper and lower displacement limit to guarantee safe.

  • The lifting height can be adjusted arbitrarily to meet the different requirements.

  • It can clamp and drop the test sample at any angle

  • Just place the machine on a flat marble or concrete floor, no special foundation needed

  • Hand-held pad human-computer interaction software, easy to operate

  • The drop height is adjustable and the control is accurate up to 2mm

  • No special foundation required, no other complicated operation or installation


Technical Specifications


         Model

Parameters

KRD41-100

KRD41-200

Max. Load

(kg)

100

200

Drop Height

(mm)

300~1500

Max. Specimen Size (mm)

Depth 840

Depth 840

Position Accuracy

±2% or ±10mm (subject to the larger value)

Drop Zone Size

(W*D/mm)

1200×1200

1400×1400

Test Mode

Face, Edge and Angle

Power

1-phase AC 220V±10% 50Hz

Working

Environment

Temperature range 0~40℃, Humidity≤80% (non-condensing)

Installation Condition

Foundation-free, the cement floor shall be leveled and the working distance of 800~1000mm shall be reserved around the equipment

Standards

ISO2248-1985   IEC 60068-2-32   ISTA 

Note: The parameters in the table are for reference only, and the parameters agreed upon by the supplier and the buyer shall prevail.


Standards

ISO 2248-1985 Packaging — Complete, filled transport packages — Vertical impact test by dropping

IEC 60068-2-32 Test Ed: Free Fall

ISTA Test Procedures: 1A, 1B, 1C, 1D, 1G, 2A, 2B, 2C, 3A, 3B, 3E, 3F, 3H, 3K, 6-AMAZON


Application Video



Projects References


KRD41 1.jpg

×